11069 Views
TOA PREMIUMTILE
TOA Premiumtile is a high performance thin layer, flexible cementitious tiling adhesive mortar containing cement, selected fine grain aggregates and specialty chemical additives.
It provides excellent bonding strength and consistency in different climate, can be used for adhering all types of tiles on masonry substrates such as sand/cement render, precast concrete and gypsum boards. TOA Premiumtile is easy-to-handle, can be used on walls and floors, interior and exterior.
It provides excellent bonding strength and consistency in different climate, can be used for adhering all types of tiles on masonry substrates such as sand/cement render, precast concrete and gypsum boards. TOA Premiumtile is easy-to-handle, can be used on walls and floors, interior and exterior.
Film type
Grey
Quantity
20 Kg.
Download Document
Product Usage
- For all types of large tiles, floors and walls, both interior and exterior.
- For marble, granite, natural stone, resin, glass tiles, floors, and walls.
- Can be applied over tiles, plywood, and fiber cement.
- TIS 2703-2566 (Special Quality Grade)
- Tiles can be adjusted within 15 minutes
How to Use
- Mix 20 kg of TOA PREMIUMTILE with 4.8 - 5.2 liters of clean water, or at a 3:1 ratio. Then, use a low-speed drill to mix until a smooth, consistent paste is formed.
- Leave the chemical to cure for 5 minutes, then stir the mixture again before using.
- Use a flat trowel to smooth the tile adhesive on the floor or tile wall .
- Use trowel to scrape the groove all over. Select the groove of the trowel comb to match the thickness of the tile adhesive and the size of the tile.
- Lay down the tile on tile adhesive and knock the tile firmly to the tile adhesive. Make sure the tile fully touched with the tile adhesive.
- Wait for 24-48 hours before grouting.
- Coverage 20 kg / 4.0 m²
