876 Views
Shark All in One Plast
SHARK ALL IN ONE PLAST is a ready-mixed plaster made from specially selected high-quality materials, specifically formulated for plastering applications. It can be applied to autoclaved aerated concrete (AAC) blocks, concrete blocks, clay bricks, and concrete surfaces.
The product enhances plastering efficiency and features excellent water-retention properties, resulting in a smooth, soft, and easy-to-apply plaster. It also provides strong adhesion to the substrate, helps reduce cracking, and delivers a smooth and even wall finish.
Film type
Grey
Quantity
20 kg. , 40 kg.
Download Document
Product Benefit
- Suitable for plastering AAC blocks, concrete blocks, clay bricks, and concrete surfaces where a high level of smoothness is required. Applicable for both interior and exterior walls.
- Easy to apply with a smooth, soft, consistency, reducing labor effort.
- Provides strong adhesion to the substrate and helps minimize cracking.
How to Use
- Clean the surface to be plastered thoroughly, ensuring it is free from dust, dirt, and loose particles.
- Moisten the surface evenly with clean water until it is sufficiently damp.
- Mix SHARK All in One Plast (40 kg) with 8.0–9.0 liters of clean water and stir until a uniform mixture is achieved.
- Apply the plaster following standard plastering procedures for AAC block walls, clay brick walls, concrete block walls, and concrete surfaces. Apply at a thickness of 1.0–1.5 cm, not exceeding 1.5 cm per layer. Begin by pressing the trowel firmly to create a thin base coat, then add plaster to achieve the required thickness. For concrete surfaces, apply in layers and allow each layer to dry before applying the next.
- After application, finish the surface by smoothing with a trowel fitted with a sponge pad. Lightly brush off any sand particles remaining on the plastered surface using a soft broom to achieve a smooth and even finish.
