Key Features

• Adheres to Various Surfaces – Including glass, aluminium, metal, wood, and concrete.
• Good Flexibility – Accommodates joint movement.
• UV and Weather Resistant – Suitable for interior and exterior applications.

Application Instructions

Ensure the surface is clean, dry, and free from dust, oil, grease, and other contaminants.
Apply masking tape along both sides of the joint for a neat finish.
Cut the nozzle at approximately a 45° angle to match the required joint size, then insert the cartridge into a sealant gun.
Apply a continuous bead, ensuring the joint is completely filled.
Tool and smooth the sealant, then remove the masking tape before skin formation begins.
Remove excess sealant immediately and allow it to cure completely before use or exposure to water.

Recommendations

Use in a well-ventilated area.
Test adhesion on the actual surface before application.
Not suitable for applications that require overpainting.
Not recommended for structural glazing, aquariums, or food-contact surfaces unless specifically certified.
Avoid continuous water-immersion applications.
Store in a dry place away from direct sunlight and heat.