TOA NONAIL WB
Water-based construction adhesive is easy to use, low odour, and safe for occupants. It is suitable for interior installation and decorative applications, replacing the need for nails or screws. The product provides excellent bonding to various substrates such as wood, concrete, gypsum board, ceramic tiles, wall panels, plywood, particle board, mirrors, and some plastics.
Film type
White
Quantity
400 G
Download Document
Key Features
Low odour with Low VOCs Suitable for interior applications and DIY projects Does not corrode delicate materials such as foam and decorative mouldings Easy to clean with a damp cloth before the adhesive dries Paintable once fully cured
Application Recommendation
At least one bonding surface should be porous, such as wood, concrete, gypsum board, or brick, to allow proper drying and curing. Temporary support or fixing tape is recommended to hold the material in place until the adhesive sets.
TOA NONAIL WB can be applied either as a two way contact or a one way wet stick adhesive.
In both cases the first requirement is that both surfaces to be bonded are clean and dry and free of grease, oil or dust. Any loose or flaking paint must be removed and preferably lightly sanded before application. (Substrate surface temperatures should not exceed 30°C and the product should not be where continued exposure to elevated temperatures will occur).
To one of the freshly prepared surfaces apply a 4 - 6 mm. bead of adhesive. Beads should not more than 45 cm. apart and butt joints should be adhered on both panel edges. Bring both surfaces together immediately
