1913 Views
TOA SILVERTILE
TOA SILVERTILE is a ready-mixed tile adhesive made from a single component. Its key ingredients include hydraulic cement, specially selected fine sand, and other specialized chemical additives. These components provide high adhesion strength, making it ideal for installing large tiles. It is suitable for both exterior and interior applications, as well as for general tiles, low water absorption tiles, marble, and granite. There is no need to soak the tiles in water before installation, and it can be applied over existing surfaces both exterior and interior
Film type
Grey
Quantity
20 Kg.
Download Document
Product Usage
- Marble, Granite and Natural Stone
- Large Tiles 100 x 100 cm
- For large granite tiles, floors and walls, both exterior and interior use.
- TIS 2703-2566 (High-Quality Grade)
- Tiles can be adjusted within 15 minutes
How to Use
- Mix 20 kg of TOA SILVERTILE with 4.8 - 5.2 liters of clean water, or at a 3:1 ratio. Then, use a low-speed drill to mix until a smooth, consistent paste is formed.
- Leave the chemical to cure for 5 minutes, then stir the mixture again before using.
- Use a flat trowel to smooth the tile adhesive on the floor or tile wall .
- Use trowel to scrape the groove all over. Select the groove of the trowel comb to match the thickness of the tile adhesive and the size of the tile.
- Lay down the tile on tile adhesive and knock the tile firmly to the tile adhesive. Make sure the tile fully touched with the tile adhesive.
- Wait for 24-48 hours before grouting.
- Coverage 20 kg / 4.0 m²
